Washington Boating Safety Course


ENGINE TYPES

OUTBOARD ENGINES

Outboard engines are mounted on the transomthe cross section of the stern. of the boat. The steering of outboards can be controlled by a hand tillerAn arm or lever attached to the top of a rudder post for the purpose of controlling the position of the rudder and so steering the craft. or a steering wheel, which moves the entire engine when steering is adjusted.

In the past, outboards were typically two-stroke engines, but manufacturers have since switched to four-stroke engines. Two-stroke engines require oil to be mixed with gasoline to lubricate the engine, and four-stroke engines require the oil and gasoline to be separate. Four-stroke engines, in addition to running quieter and smoother, are more environmentally friendly, as the exhaust they emit is virtually smokeless compared to two-strokes.

 

INBOARD ENGINES

Inboard engines are typically four-stroke automotive engines that are modified for use on the water. An inboard engine is mounted inside the hull of the boat and powers the driveshaft, through the boat bottom, which is connected to a propellera rotating mechanism that propels a vessel through the water.. Steering is controlled by a rudder, positioned either directly behind or to the side of the propeller.

STERN DRIVE ENGINES

Sterndrives are sometimes called inboard/outboards (I/O) because they have features found on both inboard and outboard engines. Similar to inboards, sterndrives use four-stroke automotive engines that are modified for use on the water. Sterndrive engines are mounted inside the boat through the transom, and power the drive trainThe system in a motorized vessel that connects the transmission to the drive axles (which rotates the gear, therefore the rudder, propelling the boat)., which is connected to the propeller. Similar to outboards, the sterndrive moves when the steering wheel is adjusted.

sterndrive